BW PolyureaProtective CoatingsContact

Polyaspartic Anti-Corrosion Wear-Resistant Floor Coating

BW0-8027

Two-component aliphatic polyaspartic floor coating for prepared industrial and outdoor floors requiring wear resistance, impact resistance, weatherability and long-term color stability.

View Technical DataRequest TDS & Quote
Finished gray polyaspartic topcoat surface on a large industrial floor

Product Description

BW0-8027 is a two-component polyaspartic floor coating, with aliphatic polyaspartic polyurea resin as the main film-forming material. It features excellent corrosion resistance, color fastness and weatherability, along with outstanding low-temperature curing performance. The product has high solid content and low viscosity, with good leveling property and strong adhesion to the substrate. It can be applied by various coating methods and cured at a low temperature of 0℃, effectively shortening the construction cycle. With excellent wear resistance, impact resistance and chemical resistance, the coating forms a dense and smooth film after curing, which can effectively isolate corrosive media and provide long-term and stable protection for the floor. It is an environment-friendly, high-performance floor coating that meets industrial environmental protection standards.

BW0-8027 Part A and Part B product packaging

Application Scope

BW0-8027 is used for prepared floor coating work in parks, plazas and industrial facilities where outdoor color stability, wear resistance and weatherability need to be reviewed.

  • Public Plaza and Park FloorsReview for city parks, plazas and prepared outdoor concrete floor surfaces.
  • Industrial Production FloorsSuitable for review in electronics, machinery, chemical, pharmaceutical and food-industry floor areas.
  • Outdoor Anti-Yellowing Floor AreasAliphatic polyaspartic chemistry supports exposed floors where non-yellowing, color retention and weathering need review.
  • Wear-Resistant Floor FinishUse as a compatible exposed floor coating layer where abrasion, impact, cleaning and service exposure must be confirmed.

Designed for Durable Weather-Resistant Floor Finishes

BW0-8027 helps applicators create a smooth, tough and color-stable polyaspartic floor finish over properly prepared substrates. It is a suitable choice when the floor system needs wear resistance, impact resistance, weatherability and practical site application.

5 mgAbrasion ResistanceSupports wear-resistance review for floor surfaces under the listed 750 g / 500 r test condition.
50 kg·cmImpact StrengthHelps review surface toughness for prepared industrial or outdoor floor coating systems.
2000 hAccelerated AgingProvides listed weatherability data for exposed topcoat review under GB/T 14522-1993.
0.15 kg/m²Coverage at 100 μmProvides a theoretical coverage reference for floor coating material planning.

Product Features and Advantages

BW0-8027 focuses on exposed floor finish performance, helping create a smooth, dense and color-stable polyaspartic surface with wear resistance, impact resistance, weatherability and practical site application.

Film Formation and Application

  • Low Viscosity and Good LevelingHelps create a tough, dense, full and bright floor coating surface with strong color appearance.
  • Good System CompatibilityShows good compatibility with polyurethane, epoxy and other compatible coating materials after project review.
  • Practical Application HandlingPrepare only the amount needed, mix evenly and confirm the final application method with the latest TDS and site conditions.
  • Low-Temperature Curing ReviewThe product description states it can cure in winter at 0°C application conditions.

Protection Performance

  • Wear and Impact ResistanceProvides listed abrasion and impact performance for floor coating system review.
  • Waterproof and Moisture ResistanceSupports floor areas where waterproof and moisture-resistance performance needs review.
  • Chemical ResistanceProvides chemical-medium resistance review for acids, alkali and salts under the listed test conditions.
  • Weather and Color StabilityDesigned to resist color change, yellowing, chalking and aging while maintaining gloss and color retention.
  • Environment-Friendly DirectionThe technical sheet states it contains no benzene solvents or harmful heavy metals.

Technical Data

These technical values are measured under controlled laboratory conditions to support product comparison, project selection and specification review. Please confirm final requirements with the latest approved TDS and project-specific conditions.

Product Information

Product data table
ItemPart APart B
AppearanceLight yellow liquidColor adjustable
Specific gravity (g/cm³)1.041.50
Viscosity (cps) @ 25°C40-60100-200
Solid content (%)6588
Mix ratio (by weight)11
Surface dry time (h)1
Pot life (min) @ 25°C40
Theoretical coverage (DFT)0.15 kg/m² film thickness: 100 μm

Physical Properties

Product data table
ItemTest standardResult
Pencil hardness2H2H
Adhesive strength (MPa), metal baseHG/T 3831-20069.3
Adhesive strength (MPa), concrete baseHG/T 3831-20062.8
Bending resistance (cylindrical)≤1 mm≤1 mm
Impermeability2.1 MPa2.1 MPa
Abrasion resistance (750 g / 500 r) / mgHG/T 3831-20065
Impact strength (kg·cm)GB/T 173250
Weather resistance, artificial accelerated aging 2000 hGB/T 14522-1993Light loss < 1, chalking < 1

Chemical Resistance

For reference: chemical medium resistance performance is obtained according to GB/T 9274-1988 test methods. Pay attention to ventilation, splash and spillage. Independent immersion testing is recommended if other specific data is required.

Product data table
Exposure itemResult
Acid resistance 30% H2SO4 or 10% HCl, 240 hNo corrosion, no blistering, no peeling
Alkali resistance 30% NaOH, 240 hNo corrosion, no blistering, no peeling
Salt resistance 30 g/L, 240 hNo corrosion, no blistering, no peeling
Salt spray resistance 1500 hNo corrosion, no blistering, no peeling
Oil resistance 0# diesel, crude oil, 30 dNo corrosion, no blistering, no peeling
Water resistance 48 hNo bubbles, no wrinkles, no color change, no peeling

Application Environment and Guide

Stable coating performance depends on the right site conditions, material temperature and application setup. Review the application environment and guide values before installation, and confirm final parameters with the latest TDS and project requirements.

Application Environment

Product data table
ConditionRequirement
Environment temperature-5°C to +35°C
Relative humidity≤85%
Dew point≥3°C

Application Guide

Product data table
Guide itemRecommendation
Application methodHand brush or roller
Air sprayAir pressure 0.3-0.5 MPa
Airless spraySpray pressure 15-20 MPa
Recommend DFT100-200 μm (topcoat)
Recoating intervalMin 2 h, max 24 h
Mixing ratioPart A:Part B = 1:1 by weight
Mixed-material handlingPrepare only the amount needed and use the mixed coating within 1 hour
Moisture controlSeal opened material to prevent moisture absorption and avoid water, alcohol, acid or alkali contact during application
Theoretical coverage reference0.15 kg/m² at 100 μm; final film build according to the latest TDS and project requirements

Application Note

  • Agitate Part B uniformly before application.
  • Mix according to the required ratio, prepare only the amount needed, and use the mixed coating within the listed pot life.
  • Seal the package well after mixing or use to prevent moisture absorption.
  • Keep the application site dry and clean, and avoid contact with water, alcohol, acids and alkali during application.

Product Curing Time, Shelf Life and Packing

Use the listed curing profile, shelf life, packing and storage requirements for application scheduling, warehouse handling and order planning.

Product Curing Time

The curing time varies with the environment condition, especially temperature and relative humidity.

Product data table
Substrate temperatureSurface dryFoot trafficSolid dry
+10°C2 h24 h7 d
+20°C1.5 h8 h7 d
+30°C1 h6 h7 d

Shelf Life & Packing

Product data table
ItemDetails
Shelf life from date of manufacturePart A: 10 months · Part B: 10 months, original package sealed
Storage temperature+5°C to +35°C
PackingPart A 20 kg/drum · Part B 20 kg/drum
Packaging requirementKeep the product package tightly sealed
Storage precautionStore in a cool, ventilated place and avoid direct sunlight

Product Health and Safety Information

Product Health and Safety Information

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.

Integrity Declaration

Colorful Whale Advanced Materials (Shanghai) Co., Ltd. guarantees that the technical data stated in this sheet is based on laboratory tests. Actual testing methods may vary due to different circumstances. Users should test and verify applicability. Colorful Whale Advanced Materials (Shanghai) Co., Ltd. does not take any other responsibility except product quality and reserves the right to modify the listed data without prior notice.

BW0-8027 Frequently Asked Questions

Review the main product, floor system, application and document questions before specifying or ordering BW0-8027.

BW0-8027 is a two-component aliphatic polyaspartic polyurea-resin floor coating for prepared floors requiring anti-corrosion, wear resistance, weatherability and color stability.

The technical sheet lists machinery, electronics, city parks and plazas, food, pharmaceutical and chemical floor areas.

BW0-8027 should be reviewed as a thin floor coating or exposed finish layer. It should not be specified as the main spray polyurea membrane or a thick-film waterproofing layer.

The technical sheet says Part B should be stirred uniformly, mixed material should be prepared only as needed, and the coating should be used within the listed pot life while avoiding moisture, water, alcohol, acid and alkali contact.

The product information table lists theoretical coverage of 0.15 kg/m² at 100 μm. The application notes say to prepare only the amount needed, mix evenly and use the mixed coating within 1 hour.

Confirm surface preparation, moisture condition, compatible primer or intermediate layer, recoat interval, traffic exposure, chemical exposure and target film build before full application.

Buyers can request the latest TDS, SDS, application guidance and project-specific coating-system recommendation before ordering BW0-8027.

Previous ProductBW0-8032View productProduct categoriesAll productsView categoryNext ProductBW0-8028View product

Request BW0-8027 Technical Documents or a Quotation

Share the floor substrate, service exposure, traffic load, application method and target finish so we can review BW0-8027 documents, packing information and quotation support before ordering.

By submitting this form, you agree that BW Polyurea may use the information provided to review and respond to this inquiry in accordance with our Privacy Policy. Website use is also subject to our Terms of Use.